The first point is that the equipment must be placed on a flat work surface, and the anchor screws must be adjusted to level the workbench.
The second point, adjust the level of the machine and the flatness of the work surface. The flatness of the worktable needs to be adjusted after the wire table is punched.
The third point, the adjustment of the gap between the knife grooves and the knife tip: install the sharpened blade on the knife holder of the white steel knife; install the alloy knife holder with the blade on the knife holder of the alloy knife holder, Adjust by turning the screw.
The fourth point, it is best for technicians to carry out door-to-door installation and debugging.
